Blower Heat Regenerated Type (BRD) | Compressed Air & Gas Drying Systems

Home | Contact us | Feedback

PSA Nitrogen Gas Plants, PSA Oxygen Gas Plants, Gas Purification & Dehydration Systems, PSA Nitrogen Gas Generators, Ammonia Crackers, Compressed Air Drying Systems, Low Pressure Air Dryer, Heat of Compression Air Dryer, PSA Nitrogen Gas Plant, Internal Heated Air Dryer, NPLD & Split Flow Air Dryer, Air & Gas Filters & Separators, PSA Nitrogen Gas Generator, Air Receivers, Heat Exchangers, After Coolers, Auto Drain, Piping Contracts, Air Heaters, PSA Nitrogen Gas Generators, Oxygen Gas Analyzers & Sensors, Fuel Efficiency Monitors...

Products

Compressed Air & Gas Drying Systems

Heatless Type | Heat of Compression Type (HOC) | Internal Heater Type (IHD)
Blower Heat Regenerated Type (BRD) | Split Flow-No Purge Loss Type (SFD)
Refrigerated Type | Custom Made

Blower Heat Regenerated Type (BRD)

This dryer is similar to the Internal Heater type dryer except that no process air is wasted. For regeneration, a blower provides the atmospheric air which is pre-heated in an external heater, to regenerate the desiccant bed. Therefore no process air is used for regeneration. The unit is fully automatic.

NO.	CAPACITY		PIPE LINE SIZE mm	POWER CONSUMPTION KWH / DAY/	APROX. OVERRALL DIMENSIONS
NO.	M³/ HR	CFM	PIPE LINE SIZE mm	POWER CONSUMPTION KWH / DAY/	LENGHT mm	WIDTH mm	HEIGHT mm
ANBRD-01	163.0	100	25	60.00	1600	1400	1800
ANBRD-02	244.5	150	25	72.45	1800	1500	2000
ANBRD-03	326.0	200	40	101.70	1800	1500	2000
ANBRD-04	489.0	300	40	144.90	2000	1500	2200
ANBRD-05	652.0	400	50	195.76	2000	1500	2200
ANBRD-06	815.0	500	50	246.60	2000	1500	2200
ANBRD-07	978.0	600	50	289.75	2000	1800	2400
ANBRD-08	1222.0	750	65	369.91	2200	1800	2400
ANBRD-09	1630.0	1000	65	508.52	2400	1800	2600
ANBRD-10	2037.0	1250	80	594.92	2500	2000	2800
ANBRD-11	2445.0	1500	80	724.52	2500	2000	3000
ANBRD-12	3260.0	2000	100	949.53	3000	2000	3000
ANBRD-13	4075.0	2500	100	1210.08	3000	2000	3000

[ Top ]

[ FOR VIEWING THE SCHEMATIC DRAWING ]

The above capacities are rated at an inlet temp. of 40^°C., 7kg/ Cm² Pr. and at an outlet dew point of (-) 40^°C. at Atm. Pressure, Supply Voltage of 220 V-1 PH- 50 HZ or 415V-3PH-50 Hz.

Above data is only for estimation and can be changed without notice. For special systems and higher capacities contact us.